Search results

The study aims to assess the efficiency of nanocomposite to improve the properties of gap-filling materials for pottery artifacts.

Five different pastes were used in the laboratory studies. The pastes consist mainly of pottery powder (grog), dental plaster, microballoons and an adhesive of Primal AC33, nano-silica and nano kaolinite in various concentrations. The prepared samples were subjected to accelerated heat and light aging. Besides, some investigations were used to evaluate the efficacy of the additive nanomaterials, such as TEM, digital and scanning electron microscopy microscopes. Contact angle, color change, shrinkage degree, physical properties and compressive strength tests were also conducted.

The results indicated that using Nano-silica considerably improves the mechanical strength and decreases the shrinkage of gap-filling materials. According to the results, a mixture of grog, microballoons and Primal AC33/Nano-silica Nanocomposites is the optimal gap-filling paste for archaeological pottery. Moreover, this paste showed a higher contact angle (120°), lower color change (ΔE = 2.62), lower shrinkage (3.3%), lower water absorption (3.36%), lower porosity (5.05%) and higher compressive strength (5124 N/mm²).

This paper attains to develop an economic polymer-nanocomposite that can be used with gap-filling materials for pottery artifacts.

This study aims to offer an effective nanocomposite for potential use to consolidate and protect deteriorated archaeological pottery.

Three nanocomposites were used in the experimental study. This study used nano Primal AC33, silicon dioxide (SiO₂) and montmorillonite (MMT) nanoparticles to protect and consolidate pottery specimens. Pottery specimens were made at 800°C for this investigation. Consolidation materials were applied with a brush. The properties of the treated pottery specimens were assessed using several methods such as digital and scanning electron microscopes, static water contact angle, color alteration, physical properties and compressive strength.

Microscopic examination indicated the ability of the nano Primal AC33/MMT nanocomposites to cover the outer surface well and bind the inner granules. Concerning specimens with code F treated with nano Primal AC33 5%/MMT 3% nanocomposites, it achieved an increase in contact angle (120°), density (1.23 g/cm³) and compressive strength (561 kg/cm²), as well as a decrease in color change (ΔE = 2.62), water absorption (4.45%) and porosity (5.46%). The novelty of the results is due to the characteristics of nano Primal AC33 5%/MMT 3% nanocomposites used in the current study.

This study describes the significant results of the analytical methods used for evaluating consolidation materials used in this study. The findings offer useful information for the protection of archaeological pottery. The investigation indicated that nano Primal AC33 5%/MMT 3% nanocomposites gave the best results. Therefore, it is recommended to use this nanocomposite to consolidate archaeological pottery. As a result, the current work provides a promising first step in conserving archaeological pottery for future studies.

The purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost mechanical strength of degraded papyrus without any harmful effects on the inks.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

The effect of strengthening materials was studied on cellulose and carbon ink, which makes this study closer to reality as the manuscript is the consistent structure of cellulose and inks, whereas most of the literature stated the impact of consolidation materials on the strengthening the cellulosic supports without attention to their impact on inks.

The pursuit of manufacturing new inks with low financial cost is an urgent economic demand. Thus, the purpose of this paper is to synthesize some new pigments derived from Lithol Rubine (LR) via a successful simple route and to investigate their physicochemical properties for usage in the inks industry.

Two novel pigments were generated during the reaction of LR with Mn(II) and Co(II) salts in ethanolic solutions. The obtained pigments were isolated as solid compounds and characterized through elemental analysis, UV–vis, Fourier transform infrared, 1H NMR spectra, oil absorption, specific gravity, melting point, molar conductivity and magnetic moment measurements. Their dyeing and durability characteristics were examined using American Standard Testing Methods. The synthesized pigments were then applied in inks formulation.

The printing inks containing the two new pigments (LR–Mn and LR–Co) were compared to (GF 59-606 and GF 59-616), respectively. The results of this study showed that the performance of newly prepared pigments was comparable to that of commercial pigments currently in use in the inks industry.

LR and its new derivative pigments can be used in other different applications such as paper coating, crayon, rubber and paint industries.

The authors designed an efficient synthesis for some novel pigments. The synthesis technique is featured by a short reaction time, high yields and ease of use. The pigments developed would be good and cost-effective substitute for the original commercially available and expensive pigments used in the inks industry.

Ramadan intermittent fasting (RIF) has produced heterogeneous and domain-specific effects on cognitive function. This study aims to investigate the effect of RIF on verticality perception or estimation of subjective visual vertical (SVV) in young adults. The significance of SVV is that it is essential for spatial orientation, upon which many daily activities depend.

Verticality perception was assessed with a computerized rod and frame test (CRFT) in two visual conditions: without a surrounding frame and with a distracting tilted frame. The tilted frame condition measures level of visual dependence or reliance of visual cues for posture and orientation. In total, 39 young adult men were recruited at different stages of Ramadan fasting: 21 were tested at the end of the first week (Week 1) and 18 others at the end of the third week (Week 3) of Ramadan. Also, 39 participants were recruited to serve as a non-fasting control group. Factorial ANOVA analyses were conducted to identify the main effects of fasting status, time-of-day and the interaction between them on blood glucose levels, nocturnal sleep duration and vertical alignment errors.

The main effect of fasting status on glucose level was significant (p = 0.03). There was a significant time-of-day main effect on glucose levels (p = 0.007) and sleep duration (p = 0.004) only in fasting participants. Neither the main effects of fasting status nor time-of-day were significant for rod alignment errors in both visual conditions. The interaction of fasting status and time-of-day was not significant either. This may indicate that any negative effect of Ramadan fasting on activities that are critically dependent on verticality perception and spatial orientation, such as sports and driving, may not be due to verticality misperception.

The present study was the first to investigate the effect of Ramadan fasting on spatial orientation. It demonstrated robustness of verticality perception to fasting status and the point of fasting during Ramadan. Verticality perception was also unaffected by time-of-day effects in non-fasting and fasting groups at two different points of Ramadan. This study corroborates others reporting heterogeneous effects of Ramadan fasting on cognitive function.

This study aims to investigate the possibility of synthesizing cobalt doped willemite ceramic blue pigment by using Egyptian white sand as environmental and economical raw material for multi-applications in coatings and inks.

After the synthesis process, the prepared blue pigment was characterized via X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray analysis technique. Then the blue pigment was integrated into both coating and ink formulations. The effect of the prepared multifunctional coatings on corrosion resistance and thermal stability was evaluated using different standard tests. Also, the effect of inclusion of blue pigment in flexographic printing ink formulation was done.

The results showed that the coating containing the cobalt doped willemite blue pigment offered good anticorrosive performance and high thermal stability. Additionally, the presented results revealed that integration of the blue pigment in flexographic printing ink formulation enhanced fineness, gloss, viscosity and color more than the commercial one “FX 430–201.”

In conclusion, relied on the eco-friendly principle which can be regarded as an economic and green strategy, it can be obtained that this new pigment can provide good multifunctions such as corrosion resistance and thermal stability in coatings and good fineness, gloss, viscosity and color in inks which can enable them to be widely applied in different industries.

Paper aims to evaluate the efficiency of traditional chitosan, nano chitosan, and chitosan nanocomposites for consolidating aged papyrus samples. Cellulose-based materials, such as papyrus sheets and paper, which are the most common types of writing supports for works of art in many museums and archive. They are subjected to different types of deterioration factors that may lead to many conservation problems. Consolidation treatment is one of the most common conservation treatments, which should have perform after much testing to select the appropriate consolidants.

This research paper aims to evaluate the resistance of traditional chitosan, nanochitosan and chitosan/zinc oxide nanocomposite as an eco-friendly papyrus strengthening. Untreated and treated papyrus was thermally aged and characterized via scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR). Antimicrobial activity of the papyrus specimens was also determined against four tested pathogenic bacteria by disc diffusion method: MRSA, Staphylococcus aureus, E. coli and P. aeruginosa.

The results revealed that chitosan nanocomposite showed a remarkable enhancement of papyrus tensile properties and presence of ZnO prevents the effects of biodeterioration.

Zinc oxide nanoparticles enhance the optical properties and increase the chemical reactions between the consolidating material and the treated papyrus.

This study aims to evaluate the efficiency of using some polymers at different concentrations in the consolidation of vegetable-tanned leather artifacts.

New vegetable-tanned leather samples were prepared. The consolidants used were polyacrylamide (PAM) and polymethyl methacrylate/hydroxyethyl methacrylate (MMA-HEMA). Accelerated heat aging was applied to the untreated and treated samples. Analytical techniques used were Fourier transform infrared spectroscopy (FTIR), digital microscope, scanning electron microscope (SEM), change of color and mechanical properties.

The characteristic FTIR bands showed the effect of accelerated heat aging on the molecular structure of the studied samples, but treated and aged treated samples used were better than aged untreated samples. Microscopic investigations (digital and SEM), and mechanical properties proved that 2% was the best concentration for polymers used. The change in the total color difference of the treated and aged treated samples was limited.

This study presents the important results obtained from PAM and poly(MMA-HEMA) used for the consolidation of vegetable-tanned leather artifacts. The best results of the studied polymers can be applied directly to protect historical vegetable-tanned leathers.

The purpose of this paper is to evaluate the efficiency of commercial silica, silica fume-waste (SF) and modified silica fume-waste (mSF) as reinforcing filler in acrylonitrile-butadiene rubber (NBR) and ethylene propylene diene monomer (EPDM) through the mixing process of rubber. The composites were prepared using different loadings of silica fume and commercial silica in EPDM and NBR composites. Structural characterization of silica and SF was done using X-ray fluorescence and scanning electron microscopy (SEM). The surface of silica fume waste was modified using poly methyl methacrylate/butyl acrylate through emulsion polymerization to increase the interaction between silica and rubber, then consequently better dispersion in rubber matrix was obtained. The mSF waste was characterized using FT-IR spectra and transmission electron microscopy.

The investigated rubber mixes and vulcanizates were evaluated by measuring the curing characteristics, mechanical testing, thermogravimetric analysis and morphological studies (SEM). The mechanical properties of composites including tensile strength, elongation at break and modulus were estimated and analyzed.

The results revealed that the composites (NBR and EPDM) containing mSF as filler exhibited better rheological and mechanical properties compared to unmodified silica waste and commercial silica. The SEM analysis indicated that the mSF was homogeneously dispersed through the surface of NBR and EPDM composites. Also, results showed that (NBR and EPDM) composites exhibited remarkable improvements in tensile strength, elongation at break and hardness in the presence of mSF; they also showed an increase in the thermal stability. This means that the treatment of surface SF can improve its dispersion in rubber.

Silica cannot be applied in rubber matrix without surface modification because of their incompatibility; their dispersion is not good without surface modification.

The modified silica surface is considered as effective reinforcing filler which can replace other fillers because of its lower surface energy and enhanced intercalating behavior in rubber.

This study is just a start in establishing rubber projects with wide applications in the industry and providing a cheap local product while preserving the quality and that is the use of factory waste, which helps in protecting the environment from pollution.

mSF is cheap with relatively high purity, which make rubber/mSF composites appear as new grade of material that can be used in different media rather than rubber.

This study aims to investigate the swelling behavior, mechanical and thermal properties of ternary rubber blend composites prepared by melt blending based on carbon black (CB)-filled natural rubber (NR)/styrene-butadiene rubber (SBR)/nitrile butadiene rubber (NBR) blends, containing a variety of compatibilizers. Various compatibilizers, maleic acid anhydride (MAH), prepared emulsion and adhesion system (HRH) were used. A series of NR/SBR/NBR blends at a 30/30/40 blend ratio reinforced with 45 phr of CB were prepared using the master-batch method.

Thermal aging properties of the composites characterized by their aging coefficient and retention in tensile and elongation at break (E.B. %). Thermal degradation of ternary rubber blend composites based on melt blending has been studied using thermogravimetric analysis.

The swelling coefficient decreased with increased compatibilizer loading. Results also showed that the tensile strength and E.B. (%) decreased with aging over the entire aging period. Additionally, the addition of compatibilizers into the ternary rubber blend composite had slightly improved the thermal stability.

Interactions between the different components of blends at the interfaces have a high impact on the interfacial properties of the rubber blend.

Compatibilizers significantly improve the properties of the resulting composites with the loading of investigated compatibilizers because of the uniform dispersion of CB in the rubber matrix.

Using blends in the rubber industry led to the high-efficiency production of low-cost products.

The rubber blending has a significant positive effect on a wide range of applications such as structural applications, aerospace, military, packaging, tires and biomedical, so improving the compatibility of blends will make new materials suitable for new applications.